Expert Answers about Dutchmen Kodiak Travel Trailer

• Can etrailer Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies Fit Lippert 12" Brakes
• If the 2" long x 3-1/8" wide x 1" tall dimensions of the Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies # AKBRKR-M12 matches what you have on your 12" x 2" trailer brakes then this will work great for your application! These brake magnets are made by AxleTek who makes quality trailering equipment but doesn't add the price of the big name brands to the products. From my experience their brake equipment holds up just as well as the Dexter Axle and Lippert systems so you...
  view full answer...


• Bearing Kit For Lippert 3,500 lb Axle
• The "LCI35" indicates that your Lippert axle uses 3,500 lb bearings and seals, and the correct bearing kit is the following: - Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles # BK2-100 Then for wet bolts you can use the Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs # 126B2.
  view full answer...


• Replacement Bearing Kit, Hubs and Brake Assemblies For a 2013 Dutchmen Kodiak 221RBSL Travel Trailer
• The Hub Bearing Kit # BK2-100 is what you need for your 2013 Dutchmen Kodiak 221RBSL travel trailer. This kit is for one hub so you will need 4 kits if you are replacing them on both axles. We also have the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K that comes complete with pre-greased bearings and grease seal installed. This will be needed if your drums are damaged or worn past their service life. Like the bearings these are per hub so you will need 4 if you want to...
  view full answer...


• How To Determine Fit of the Lippert Thin Shade Complete Window Kit
• The Lippert Thin Shade Complete Window Kit part # LC806621 will fit any Lippert door so if this is what you have then you don't need to worry about measuring. However, if you don't have a Lippert door then your window cutout needs to be 15" wide x 24" tall in order for the shade kit to work. The window keys you need to remove the old window are included.
  view full answer...


• Is The HydroMax RV Fresh Water Pump A Good Replacement For An Artis Products Water Pump
• The Artis water pump you have has a 40 psi and 3.0gpm rating so the HydroMax RV Fresh Water Pump (3.0gpm / 55psi) # P25201 would be a bit higher psi but would still be an acceptable replacement. If you wanted something a bit closer to your psi level then you could go with the Seaflo Diaphragm Pump for Boats and RVs # SE58FR, which has a 45 psi rating.
  view full answer...